|
Barrel Strainers
Strainers made from Schedule 40 PVC Straight Pipe. 6" Intake
Ratio 2.74:1, all others have a 4.1:1 Intake Ratio. Caps are fixed
but removable. Designed for vertical installations. All have 360
Deg Hole patterns with full hole patterns in the caps also.
Barrel Strainers (for vertical
installation) |
| Part
# |
Size |
Elbow |
Open Hole Area |
Intake Ratio* |
| 9143-100 |
6" |
PVC Barrel Strainer |
77.33 sq. in. |
2.74:1 |
| 9194-000 |
8" |
PVC Barrel Strainer |
115.96 sq. in. |
4.10:1 |
| 9194-100 |
10" |
PVC Barrel Strainer |
116.4 sq. in. |
4.11:1 |
| 9194-200 |
12" |
PVC Barrel Strainer |
116.4 sq. in. |
4.11:1 |
*As compared to a cross section of a 6"
intake of 28.27 sq. in.
Design Usage:
- Vertical installation in deep water.
- Ideal for pier usage.
Pull Down:
- Minimum water level to uppermost hole pattern at low flows
< 300 GPM. Flows greater than 300 GPM must allow 12" above
uppermost line of holes to avoid vortex.
Material & Design:
- Schedule 40 PVC (straight pipe).
- Radial hole pattern 360°.
- Full hole pattern in end cap.
Lengths:
- 6" - 15 1/4" long.
- 8" - 22" long.
- 10" - 24" long.
- 12" - 22" long.
End Caps:
- 6 & 8" made with molded (removable) snap cap.
- 10 & 12" (removable) fixed end cap bolted in place.
|
